2026-10-28
How to Operate a Harrington CB020 2 Ton Hand Chain Hoist
Which side to stand on, which way to pull, and why the pawl click on a Harrington CB020 2 ton hand chain hoist is the check that says the load is held.
Continue Reading2 Ton Chain Hoist Sourcing notes
How to write a 2 ton chain hoist factory request and how to read a quoted line against rated capacity, lift height, power and attached documents. These notes stay on the buyer side. They do not transfer factory certificates or completed projects to this website.
2026-10-28
Maintaining the Optional CB020 Inspection Hook on a 2 Ton Chain Hoist
Maintain the optional inspection hook on a Harrington CB020 2-ton chain hoist: when internal access pays off, the fastener work it adds, and the test before service.
Continue Reading2026-10-28
2 Ton Chain Hoist Load Chain Wear: P and d on a CB020
On a 2 ton chain hoist, Harrington CB020 load chain wear takes two measurements: P against 4.91 in and d against 0.28 in, each its own pass or fail.
Continue Reading2026-10-28
Harrington CB020 2 Ton Chain Hoist Headroom and Hook Fit
On the Harrington CB020, headroom is a stack you configure, and the latch-lock hook you pick can change it. Here is what to confirm in writing before ordering.
Continue Reading2026-10-28
Harrington CB020 2 Ton Chain Hoist: Pull, Falls, Weight
Harrington CB020 2-ton hand chain hoist specs: 72 lb hand pull, single 8.0 mm chain fall, 41 lb net weight, and how ordered lift length adds beam load.
Continue Reading